Scott Aerator Gusher Pond Fountain
The Scott Aerator Gusher Delivers a Powerful, Wind-Resistant Show
Most pond fountains spread water outward in patterns and arcs. The Scott Aerator Gusher does the opposite -- it sends a dense, wind-resistant vertical column of water straight up in a geyser-style display that commands attention from every angle. Around the base of the column, a frothy, highly aerated cascade creates a "white boil" effect that sounds as good as it looks. The 1/2 HP launches a 15-foot column that flares to 6 feet wide at the top. Scale up to the 3 HP and you are looking at a 50-foot geyser visible from across the property -- a display that holds its shape even in windy conditions where spray-pattern fountains lose definition.
The Gusher is not just about visual impact. Its rapid water movement generates aggressive aeration that adds oxygen, breaks down decaying vegetation, maintains water clarity, and deters mosquitoes from breeding. Flow rates range from 3,000 GPH on the 1/2 HP to 10,500 GPH on the 3 HP -- serious circulation that keeps a pond healthy while putting on a show. Every Gusher runs on an oil-free stainless steel submersible motor built in Holland, Michigan. There is no oil to monitor, no routine service to schedule, and it handles fresh water and salt water equally well. When winter arrives, leave it in the pond, cut power, and let the ice form around it.
Six motor sizes across nine total configurations give you room to match the Gusher to anything from a compact backyard pond to a multi-acre lake. The 1/2 HP, 3/4 HP, and 1 HP ship in both 115V and 230V, while the 1.5 HP, 2 HP, and 3 HP are 230V only. Add optional LED light kits to illuminate the column after dark, or plug in a timer to control when the motor runs. Use the motor comparison and cable length charts below to find the right configuration for your site.
The Scott Aerator Gusher sends a dense, wind-resistant vertical column of water straight up in a geyser-style display. The 1/2 HP launches a 15-foot column, scaling up to a 50-foot geyser on the 3 HP. A frothy "white boil" at the base adds dramatic sound and aggressive aeration. Flow rates range from 3,000 to 10,500 GPH.
The oil-free stainless steel motor runs 24/7 with zero maintenance, handles salt water, and survives winter without removal or winterizing. The three smallest motors come in 115V and 230V, while larger motors are 230V only.
Six HP ratings from 1/2 HP to 3 HP cover ponds from a compact backyard to multi-acre lakes. Add optional LED lights or a timer to customize. Use the charts below to compare motors and confirm cable length.
Looking for another option? Browse all our full Pond Fountain collection now.
Benefits of the Scott Aerator Gusher Pond Fountain
Scott Gusher Motor Configuration Comparison
| 1/2 HP 115V |
1/2 HP 230V |
3/4 HP 115V |
3/4 HP 230V |
1 HP 115V |
1 HP 230V |
1-1/2 HP 230V |
2 HP 230V |
3 HP 230V |
|
|---|---|---|---|---|---|---|---|---|---|
| Best for Pond Size | 1/8 - 1/4 Acre | 1/4 - 1/2 Acre | 1/2 - 3/4 Acre | 3/4 - 1 Acre | 1 - 1.5 Acres | 1 - 2+ Acres | |||
| Minimum Water Depth | 36" | 44" | 44" | 50" | 56" | 64" | |||
| Geyser Height | 15' | 20' | 25' | 30' | 45' | 50' | |||
| Flow Rate | 3,000 GPH | 3,900 GPH | 4,500 GPH | 5,400 GPH | 8,100 GPH | 10,500 GPH | |||
| Amps | 10.0A | 5.0A | 10.7A | 6.8A | 11.5A | 8.2A | 10.6A | 10.0A | 13.3A |
| Est. Operating Cost | $0.06/hr | $0.08/hr | $0.11/hr | $0.17/hr | $0.23/hr | $0.33/hr | |||
| Min. Anchor Weight (each) | 25 lbs | 25 lbs | 35 lbs | 45 lbs | 45 lbs | 55 lbs | |||
| Standard Cord | 70' / 12 GA | 70' / 12 GA | 70' / 12 GA | 100' / 12 GA | 100' / 10 GA | 100' / 10 GA | |||
| Motor Warranty | 5 Years | ||||||||
Key Features of the Gusher by Scott Aerator
- Dense, Wind-Resistant Vertical Column: Unlike spray-pattern fountains that lose their shape in a breeze, the Gusher sends a tight, dense column of water straight up that holds together even on windy days. On the 1/2 HP, the geyser reaches 15 feet and flares to about 6 feet wide at the top. On the 3 HP, it climbs to 50 feet -- a display that dominates any property it sits on.
- "White Boil" Aeration Effect: The frothy cascade at the base of the column is more than visual -- it drives aggressive oxygen transfer into the water. This rapid churning breaks down decaying vegetation, fights algae, maintains water clarity, and creates enough surface disruption to deter mosquitoes from breeding on the pond.
- Oil-Free Stainless Steel Motor: Every Gusher runs on an environmentally friendly submersible motor sealed in marine-grade stainless steel. There is no oil to monitor, no filter to replace, and no routine service to schedule. All motors are manufactured in Holland, Michigan and rated for continuous 24-hour operation.
- Six HP Options, Nine Configurations: The 1/2, 3/4, and 1 HP ship in both 115V and 230V. The 1.5, 2, and 3 HP are 230V only. Each step up adds geyser height and flow rate so you can size the display to your property.
- Factory-Attached Power Cord: Each unit ships ready to connect with a submersible cord (70 feet of 12-gauge on the 1/2, 3/4, and 1 HP; 100 feet of 12-gauge on the 1.5 HP; 100 feet of 10-gauge on the 2 and 3 HP). The 115V models include a standard plug. Longer replacement cords can be ordered separately.
- No Winterizing, No Removal: All Scott Aerator products are engineered to handle subzero temperatures without any damage to the motor, housing, or float. When the season ends, cut the power and walk away. There is no draining, no storage, and no reinstallation in the spring.
See the Gusher Fountain in Action
Maximum Cable Length - Motor to Main Breaker
| Cable Size | 1/2 HP 115V |
1/2 HP 230V |
3/4 HP 115V |
3/4 HP 230V |
1 HP 115V |
1 HP 230V |
1-1/2 HP 230V |
2 HP 230V |
3 HP 230V |
|---|---|---|---|---|---|---|---|---|---|
| 12 AWG | 160' | 650' | 125' | 480' | 75' | 400' | 310' | 250' | 190' |
| 10 AWG | 250' | 1,020' | 150' | 760' | 100' | 630' | 480' | 390' | 300' |
| 8 AWG | 390' | 1,610' | 200' | 1,200' | 150' | 990' | 770' | 620' | 470' |
| 6 AWG | 620' | 2,510' | 350' | 1,870' | 300' | 1,540' | 1,200' | 970' | 750' |
| 4 AWG | 960' | 3,880' | 700' | 2,890' | 650' | 2,380' | 1,870' | 1,530' | 1,190' |
| 2 AWG | 1,460' | 5,880' | 1,100' | 4,370' | 1,050' | 3,610' | 2,850' | 2,360' | 1,850' |
Requirements & What to Know Before You Buy
- Dedicated GFCI Circuit: A GFCI-protected circuit is mandatory for all Gusher installations. Have a licensed electrician handle the wiring if you are not sure your current setup meets this requirement.
- Swimmer Safety: Power must be disconnected any time someone enters the water. This applies to all electric pond equipment, not just the Gusher.
- Depth Requirements by Motor: The pond must be at least 36" deep for the 1/2 HP, 44" for the 3/4 HP and 1 HP, 50" for the 1.5 HP, 56" for the 2 HP, and 64" for the 3 HP. Measure at the planned placement point, not at the shoreline.
- Two-Point Anchoring: The Gusher requires two anchor weights (or concrete blocks) and two nylon mooring ropes to hold position. Minimum weight per anchor ranges from 25 lbs on the 1/2 and 3/4 HP to 55 lbs on the 3 HP. Anchors and rope are sold separately.
- No Extension Cords Allowed: Running the motor through an extension cord is not permitted. If the included power cord does not reach your breaker panel, use the cable length chart above to select the correct wire gauge for the total run distance, and order a longer cord or have a qualified electrician install a dedicated line.
- Choosing 115V or 230V: The 1/2, 3/4, and 1 HP motors come in both voltages. A 115V unit plugs into any standard outlet. A 230V unit needs to be hardwired into a panel. Scott Aerator strongly recommends the 230V version for the 1 HP to avoid voltage drop over longer cord runs. The 1.5 HP, 2 HP, and 3 HP are 230V only.
- ARL Compliance: Every Gusher configuration is ARL tested and approved to meet the applicable requirements of UL and the National Electric Code as a complete package.
What's Included & Optional Add-Ons
- In the Box: Fountain pump with nozzle, float platform, stainless steel filter basket, self-tapping assembly screws, submersible power cord (length and gauge depend on motor selection), and owner's manual. Everything needed to get the Gusher in the water ships together.
- Available Separately - LED Lights: Choose from Night Glo warm white or color-changing LED sets. Both screw directly onto the float and run off 115V household power. Go with a 2-light set for motors up to 1 HP, or a 4-light set for 1.5 HP and above. Every light set includes a built-in timer. The color-changing version also ships with a wireless remote rated for up to 300 feet.
- Available Separately - Motor Timers: Set the fountain to run on a custom schedule using a mechanical-dial timer with multiple on/off positions. Pick 115V (plug-in) or 230V (hardwired), both in a weather-resistant housing. Timers control the motor only; the light kits handle their own scheduling independently.
- Available Separately - Anchors & Mooring Line: Two anchor weights (or concrete blocks) and two nylon ropes are required to hold the Gusher in position. These are not included in the package and must be sourced before installation.
- Available Separately - Extended Power Cords: If your breaker panel sits farther from the pond than the factory cord can reach, longer submersible replacement cords are available in the same gauge as the original.
Gusher Fountain by Scott Aerator Specifications
| Manufacturer | Scott Aerator |
| Product Type | Geyser-Style Vertical Pond Fountain |
| Motor Options | 1/2 HP, 3/4 HP, 1 HP, 1.5 HP, 2 HP, 3 HP |
| Voltage Options | 115V and 230V on 1/2, 3/4, and 1 HP; 230V only on 1.5, 2, and 3 HP |
| Total Configurations | 9 |
| Motor Construction | Stainless steel, oil-free, submersible motor across all configurations |
| Spray Pattern | Dense vertical geyser column with "white boil" cascade at the base |
| Geyser Height Range | 15' (1/2 HP) to 50' (3 HP) |
| Flow Rate Range | 3,000 GPH (1/2 HP) to 10,500 GPH (3 HP) |
| Best for Pond Size | 1/8 acre through 2+ acres depending on motor |
| Minimum Water Depth | 36" (1/2 HP) to 64" (3 HP) |
| Amp Draw Range | 5.0A to 13.3A depending on configuration |
| Saltwater Approved | Yes, no added equipment required |
| Continuous Operation | 24-hour rated, no maintenance required, no control box needed on smaller motors |
| Year-Round Installation | Yes. Winter-safe, no winterizing needed. Freezing water does no damage. |
| Anchoring | Proper anchoring required with two weights or concrete blocks and two nylon ropes. Minimum 25 lbs to 55 lbs per anchor depending on motor. Anchors and mooring line not included. |
| Power Cord | Submersible, 12 GA (70') on 1/2, 3/4, and 1 HP; 12 GA (100') on 1.5 HP; 10 GA (100') on 2 and 3 HP. 115V models include a plug. |
| Electrical Requirement | Dedicated GFCI-protected circuit, no extension cords. 115V plugs into standard outlet; 230V is hardwired. |
| Motor Speed / Frequency | 60 Hz, single-phase |
| Optional Accessories | Night Glo warm white LED light kits, color-changing LED light kits (with remote), fountain timers (115V and 230V), mooring lines, and longer power cords |
| ARL Tested | ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. |
| Warranty | 5 years unconditional against motor defects in materials or workmanship under normal operating conditions, and 1 year against factory defects on all other product components. Warranty replacement requires return of the defective unit to the factory with shipping prepaid by the customer for inspection before replacement parts are issued. |
| Made in the USA | Yes (Holland, Michigan) |
Manual
Click to view the Gusher Fountain Manual