Scott Aerator Skyward Pond Fountain
The Scott Aerator Skyward Turns Any Pond Into a Showpiece
There is nothing quite like the sight and sound of water climbing skyward and fanning out into a wide, cone-shaped cascade on its way back down. The Scott Aerator Skyward does exactly that -- an all-brass, precision-machined center nozzle launches a powerful column of water that can be adjusted for height, while the surrounding spray fans outward in a broad mushroom-shaped pattern that sounds as beautiful as it looks. On the 1/2 HP, the center stream reaches 20 feet with the mushroom spray extending 35 feet in diameter. Scale up to the 3 HP and you are looking at a 50-foot center column surrounded by a 70-foot spray -- a display large enough to anchor any commercial property, HOA pond, or golf course water feature.
Beyond the visual impact, the Skyward moves serious water volume. Flow rates range from 3,000 GPH on the 1/2 HP to 10,500 GPH on the 3 HP, providing real aeration that boosts dissolved oxygen, discourages algae, and keeps your pond from going stagnant. Every Skyward runs on an oil-free stainless steel submersible motor built in Holland, Michigan. There is no oil to monitor, no control box to wire on the smaller units, and no routine service to schedule. It handles fresh water and salt water equally well, and when winter arrives there is nothing to drain, remove, or winterize. Turn the power off, let the pond freeze around the unit, and flip it back on after the spring thaw.
Six motor sizes across nine total configurations give you room to match the Skyward to anything from a compact backyard pond to a multi-acre lake. The 1/2 HP, 3/4 HP, and 1 HP ship in both 115V and 230V, while the 1.5 HP, 2 HP, and 3 HP are 230V only. Add optional LED light kits -- warm white or color-changing with a wireless remote -- to keep the display running after dark. Plug in an optional timer to control when the motor runs. Use the motor comparison and cable length charts below to find the right configuration for your site.
The Scott Aerator Skyward launches an adjustable center column of water surrounded by a wide, cone-shaped mushroom spray that looks and sounds stunning. The 1/2 HP reaches 20 feet high with a 35-foot spray diameter, scaling up to a 50-foot column and 70-foot spray on the 3 HP. Flow rates range from 3,000 to 10,500 GPH, providing real aeration alongside the dramatic display.
The oil-free stainless steel motor runs 24/7 with zero maintenance, handles salt water, and survives winter without removal or winterizing. The three smallest motors come in 115V and 230V, while larger motors are 230V only.
Six HP ratings from 1/2 HP to 3 HP cover ponds from a compact backyard to multi-acre lakes. Add optional LED lights or a timer to customize. Use the charts below to compare motors and confirm cable length.
Looking for alternatives? See our complete Pond Fountain collection.
Benefits of the Scott Aerator Skyward Fountain
Scott Skyward Motor Configuration Comparison
| 1/2 HP 115V |
1/2 HP 230V |
3/4 HP 115V |
3/4 HP 230V |
1 HP 115V |
1 HP 230V |
1-1/2 HP 230V |
2 HP 230V |
3 HP 230V |
|
|---|---|---|---|---|---|---|---|---|---|
| Best for Pond Size | 1/8 - 1/4 Acre | 1/4 - 1/2 Acre | 1/2 - 3/4 Acre | 3/4 - 1 Acre | 1 - 1.5 Acres | 1 - 2+ Acres | |||
| Minimum Water Depth | 36" | 44" | 44" | 50" | 56" | 64" | |||
| Center Stream Height | 20' | 25' | 30' | 40' | 45' | 50' | |||
| Mushroom Spray Diameter | 35' | 35' | 35' | 50' | 60' | 70' | |||
| Spray Size (H x W) | 20' H x 35' W | 25' H x 35' W | 30' H x 35' W | 40' H x 50' W | 45' H x 60' W | 50' H x 70' W | |||
| Flow Rate | 3,000 GPH | 3,900 GPH | 4,500 GPH | 5,400 GPH | 8,100 GPH | 10,500 GPH | |||
| Amps | 10.0A | 5.0A | 10.7A | 6.8A | 11.5A | 8.2A | 10.6A | 10.0A | 13.3A |
| Est. Operating Cost | $0.06/hr | $0.08/hr | $0.11/hr | $0.17/hr | $0.23/hr | $0.33/hr | |||
| Min. Anchor Weight (each) | 25 lbs | 25 lbs | 35 lbs | 45 lbs | 45 lbs | 55 lbs | |||
| Standard Cord | 70' / 12 GA | 70' / 12 GA | 100' / 12 GA | 100' / 12 GA | 100' / 10 GA | 100' / 10 GA | |||
| Motor Warranty | 5 Years | ||||||||
Key Features of the Skyward by Scott Aerator
- Adjustable All-Brass Center Nozzle: The Skyward's center stream comes from a precision-machined brass nozzle that can be adjusted for height, making it easy to customize the display for different settings and occasions. On the 1/2 HP, the column reaches 20 feet. On the 3 HP, it climbs to 50 feet -- visible from hundreds of feet away on larger properties.
- Wide Mushroom Spray Pattern: The surrounding cone-shaped spray fans outward in a broad, cascading pattern that ranges from 35 feet in diameter on the smaller motors to 70 feet on the 3 HP. The combination of the tall center column and the wide mushroom spray creates a layered display that looks dramatic from every angle and sounds as beautiful as it looks.
- Oil-Free Stainless Steel Motor: Every Skyward runs on an environmentally friendly submersible motor sealed in marine-grade stainless steel. There is no oil to monitor, no filter to replace, and no routine service to schedule. All motors are manufactured in Holland, Michigan and rated for continuous 24-hour operation.
- Six HP Options, Nine Configurations: The 1/2, 3/4, and 1 HP ship in both 115V and 230V. The 1.5, 2, and 3 HP are 230V only. Each step up adds spray height, width, and flow rate so you can size the display to your property.
- Factory-Attached Power Cord: Each unit ships ready to connect with a submersible cord (70 feet of 12-gauge on the 1/2 and 3/4 HP, 100 feet of 12-gauge on the 1 and 1.5 HP, 100 feet of 10-gauge on the 2 and 3 HP). The 115V models include a standard plug. Longer replacement cords can be ordered separately.
- No Winterizing, No Removal: All Scott Aerator products are engineered to handle subzero temperatures without any damage to the motor, housing, or float. When the season ends, cut the power and walk away. There is no draining, no storage, and no reinstallation in the spring.
See the Skyward Fountain in Action
Maximum Cable Length - Motor to Main Breaker
| Cable Size | 1/2 HP 115V |
1/2 HP 230V |
3/4 HP 115V |
3/4 HP 230V |
1 HP 115V |
1 HP 230V |
1-1/2 HP 230V |
2 HP 230V |
3 HP 230V |
|---|---|---|---|---|---|---|---|---|---|
| 12 AWG | 160' | 650' | 125' | 480' | 75' | 400' | 310' | 250' | 190' |
| 10 AWG | 250' | 1,020' | 150' | 760' | 100' | 630' | 480' | 390' | 300' |
| 8 AWG | 390' | 1,610' | 200' | 1,200' | 150' | 990' | 770' | 620' | 470' |
| 6 AWG | 620' | 2,510' | 350' | 1,870' | 300' | 1,540' | 1,200' | 970' | 750' |
| 4 AWG | 960' | 3,880' | 700' | 2,890' | 650' | 2,380' | 1,870' | 1,530' | 1,190' |
| 2 AWG | 1,460' | 5,880' | 1,100' | 4,370' | 1,050' | 3,610' | 2,850' | 2,360' | 1,850' |
Requirements & What to Know Before You Buy
- Dedicated GFCI Circuit: A GFCI-protected circuit is mandatory for all Skyward installations. Have a licensed electrician handle the wiring if you are not sure your current setup meets this requirement.
- Swimmer Safety: Power must be disconnected any time someone enters the water. This applies to all electric pond equipment, not just the Skyward.
- Depth Requirements by Motor: The pond must be at least 36" deep for the 1/2 HP, 44" for the 3/4 HP and 1 HP, 50" for the 1.5 HP, 56" for the 2 HP, and 64" for the 3 HP. Measure at the planned placement point, not at the shoreline.
- Two-Point Anchoring: The Skyward requires two anchor weights (or concrete blocks) and two nylon mooring ropes to hold position. Minimum weight per anchor ranges from 25 lbs on the 1/2 and 3/4 HP to 55 lbs on the 3 HP. Anchors and rope are sold separately.
- No Extension Cords Allowed: Running the motor through an extension cord is not permitted. If the included power cord does not reach your breaker panel, use the cable length chart above to select the correct wire gauge for the total run distance, and order a longer cord or have a qualified electrician install a dedicated line.
- Choosing 115V or 230V: The 1/2, 3/4, and 1 HP motors come in both voltages. A 115V unit plugs into any standard outlet. A 230V unit needs to be hardwired into a panel. Scott Aerator strongly recommends the 230V version for the 1 HP to avoid voltage drop over longer cord runs. The 1.5 HP, 2 HP, and 3 HP are 230V only.
- ARL Compliance: Every Skyward configuration is ARL tested and approved to meet the applicable requirements of UL and the National Electric Code as a complete package.
What's Included & Optional Add-Ons
- In the Box: Fountain pump with precision brass nozzle, float platform, stainless steel filter basket, self-tapping assembly screws, submersible power cord (length and gauge depend on motor selection), and owner's manual. Everything needed to get the Skyward in the water ships together.
- Available Separately - LED Lights: Choose from Night Glo warm white or color-changing LED sets. Both screw directly onto the float and run off 115V household power. Go with a 2-light set for motors up to 1 HP, or a 4-light set for 1.5 HP and above. Every light set includes a built-in timer. The color-changing version also ships with a wireless remote rated for up to 300 feet.
- Available Separately - Motor Timers: Set the fountain to run on a custom schedule using a mechanical-dial timer with multiple on/off positions. Pick 115V (plug-in) or 230V (hardwired), both in a weather-resistant housing. Timers control the motor only; the light kits handle their own scheduling independently.
- Available Separately - Anchors & Mooring Line: Two anchor weights (or concrete blocks) and two nylon ropes are required to hold the Skyward in position. These are not included in the package and must be sourced before installation.
- Available Separately - Extended Power Cords: If your breaker panel sits farther from the pond than the factory cord can reach, longer submersible replacement cords are available in the same gauge as the original.
Skyward Fountain by Scott Aerator Specifications
| Manufacturer | Scott Aerator |
| Product Type | Display Pond Fountain with Adjustable Brass Nozzle |
| Motor Options | 1/2 HP, 3/4 HP, 1 HP, 1.5 HP, 2 HP, 3 HP |
| Voltage Options | 115V and 230V on 1/2, 3/4, and 1 HP; 230V only on 1.5, 2, and 3 HP |
| Total Configurations | 9 |
| Motor Construction | Stainless steel, oil-free, submersible motor across all configurations |
| Spray Pattern | Adjustable center column with wide cone-shaped mushroom spray |
| Center Stream Height Range | 20' (1/2 HP) to 50' (3 HP) -- adjustable |
| Mushroom Spray Diameter Range | 35' (1/2 HP through 1 HP) to 70' (3 HP) |
| Overall Spray Size Range | 20' H x 35' W (1/2 HP) to 50' H x 70' W (3 HP) |
| Flow Rate Range | 3,000 GPH (1/2 HP) to 10,500 GPH (3 HP) |
| Best for Pond Size | 1/8 acre through 2+ acres depending on motor |
| Minimum Water Depth | 36" (1/2 HP) to 64" (3 HP) |
| Amp Draw Range | 5.0A to 13.3A depending on configuration |
| Saltwater Approved | Yes, no added equipment required |
| Continuous Operation | 24-hour rated, no maintenance required, no control box needed on smaller motors |
| Year-Round Installation | Yes. Winter-safe, no winterizing needed. Freezing water does no damage. |
| Anchoring | Proper anchoring required with two weights or concrete blocks and two nylon ropes. Minimum 25 lbs to 55 lbs per anchor depending on motor. Anchors and mooring line not included. |
| Power Cord | Submersible, 12 GA (70') on 1/2 and 3/4 HP; 12 GA (100') on 1 and 1.5 HP; 10 GA (100') on 2 and 3 HP. 115V models include a plug. |
| Electrical Requirement | Dedicated GFCI-protected circuit, no extension cords. 115V plugs into standard outlet; 230V is hardwired. |
| Motor Speed / Frequency | 60 Hz, single-phase |
| Optional Accessories | Night Glo warm white LED light kits, color-changing LED light kits (with remote), fountain timers (115V and 230V), mooring lines, and longer power cords |
| ARL Tested | ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. |
| Warranty | 5 years unconditional against motor defects in materials or workmanship under normal operating conditions, and 1 year against factory defects on all other product components. Warranty replacement requires return of the defective unit to the factory with shipping prepaid by the customer for inspection before replacement parts are issued. |
| Made in the USA | Yes (Holland, Michigan) |
Manuals
Click to view the Skyward Fountain Manual